The RAD160-200-EX standard Extended Angle Head, with 200mm gauge length is within the envelope of most 40 taper machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility. The RAD160-200-EX is available as standard with an ER25 collet chuck spindle (Cap. 16mm). Other output options available on request.
Centreline 90º Angle Head - Extended length - RAD160-240-EX The RAD160-240-EX standard Extended Angle Head, with 240mm gauge length is within the envelope of most 40 taper machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility. The RAD160-240-EX is available as standard with an ER25 collet chuck spindle (Cap. 16mm). Other output options available on request.
Centreline 90º Angle Head - Extended length - RAD160-280-EX The RAD160-280-EX is the longest standard Extended Angle Head variant in this series. With a 280mm gauge length can be used on either 40 or 50 taper machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility. The RAD160-280-EX is available as standard with an ER25 collet chuck spindle (Cap. 16mm). Other output options available on request.
Centreline 90º Angle Milling Head - Extended length - RAM160-200-EX The RAM160-200-EX standard Extended Milling Head, with 200mm gauge length is within the envelope of most 40 taper machines, with milling capability but with the flexibility of interchangeable tooling adapters to facilitate the holding of drills, taps, end mills and shell mills etc. The RAM160-200-EX is supplied with fully automatic toolchange facility and is available as standard with an ISO 20 taper output with manual tool clamping. See separate Datasheet for available tooling.
Centreline 90º Angle Milling Head - Extended length - RAM160-240-EX The RAM160-240-EX standard Extended Milling Head, with 240mm gauge length is within the envelope of most 40 taper machines, with milling capability but with the flexibility of interchangeable tooling adapters to facilitate the holding of drills, taps, end mills and shell mills etc. The RAM160-240-EX is supplied with fully automatic toolchange facility and is available as standard with an ISO 20 taper output with manual tool clamping. See separate Datasheet for available tooling.
Centreline 90º Angle Milling Head - Extended length - RAM160-280-EX The RAM160-280-EX is the longest standard Extended Milling Head variant in the series. With a 280mm gauge length can be used on either 40 or 50 taper machines, with milling capability but with the flexibility of interchangeable tooling adapters to facilitate the holding of drills, taps, end mills and shell mills etc. The RAM160-280-EX is available as standard with an ISO 20 taper output with manual tool clamping. See separate Datasheet for available tooling.
Centreline 90º Angle head - Extended length - RAD225-275-EX The RAD225-275-EX Extended Heavy Duty Angle Head, with a 275mm gauge length, designed primarily for use on 50 Taper machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility. The RAD225-275-EX is available as standard with an ER40 collet chuck spindle (Cap. 30mm). Other output options are available on request.
Centreline 90º Angle head - Extended length - RAD225-325-EX The RAD225-325-EX Extended Heavy Duty Angle Head, with a 325mm gauge length, designed for use on 50 Taper and other larger machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility. The RAD225-325-EX is available as standard with an ER40 collet chuck spindle (Cap. 30mm). Other output options are available on request.
Centreline 90º Angle head - Extended length - RAD225-375-EX The RAD225-375-EX is the longest standard Extended Angle Head variant in the series. With a 375mm gauge length, designed for use on 50 taper and other larger machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility but normally manually loaded due to its length. The RAD225-375-EX is available as standard with an ER40 collet chuck spindle (Cap. 30mm). Other output options available on request.
Centreline 90º Angle Milling Head - Extended length - RAM225-275-EX The RAM225-275-EX Extended Heavy Duty Milling Head, with a 275mm gauge length, designed primarily for use on 50 Taper machines, with milling capability but with the flexibility of interchangeable 30 ISO tooling adapters to facilitate the holding of drills, taps, end mills and shell mills etc. The RAM225-275-EX is available as standard with a standard ISO 30 output spindle with manual tool clamping facility. Standard Toolholders can be used with either BT/CAT/DIN/QC 30 shanks.
Centreline 90º Angle Milling Head - Extended length - RAM225-325-EX The RAM225-325-EX Extended Heavy Duty Milling Head, with a 325mm gauge length, designed for use on 50 Taper and other larger machines, with milling capability but with the flexibility of interchangeable 30 ISO tooling adapters to facilitate the holding of drills, taps, end mills and shell mills etc. The RAM225-325-EX is available as standard with a standard ISO 30 output spindle with manual tool clamping facility. Standard Toolholders can be used with either BT/CAT/DIN/QC 30 shanks.
Centreline 90º Angle Milling Head - Extended length - RAM225-375-EX The RAM225-375-EX is the longest standard Extended Milling Head variant in the series. With a 375mm gauge length, designed for use on 50 taper and other larger machines, with milling capability but with the flexibility of interchangeable 30 ISO tooling adapters to facilitate the holding of drills, taps, end mills and shell mills etc. The RAM225-375-EX is available as standard with a standard ISO 30 output spindle with manual tool clamping facility. Standard Toolholders can be used with either BT/CAT/DIN/QC 30 shanks.