Centreline 90º Angle head - Standard length - RAD120. The RAD120 is a Light, high speed unit designed primarily for use on compact 30 & 40 taper CNC machines with limited tool change weight capacity, with Drilling, Tapping and Light Milling capability. The RAD120 is available as either a single or double output unit with ER16 collet chuck output spindle(s) (Cap. 10mm)
Centreline 90º Angle head - Standard length - RAD160. The RAD160 is our standard Angle head designed for use on 40 taper machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility. Other mounting tapers are available and 7,000rpm maximum output speed is std. The RAD160 is available as standard with an ER25 Collet chuck spindle (Cap. 16mm). Other output options are available on request.
Centreline 90º Angle head - Standard length - RAM160. The RAM160 is our standard milling head designed primarily for use on 40 taper machines, with milling capability but with the flexibility of interchangeable tooling adaptors to facilitate the holding of drills, taps, end mills, shell mills etc. The RAM160 is available as standard with an ISO 20 taper output spindle and has fully automatic toolchange capability. See our separate datasheet referring to the range of ISO20 Modular Tooling.
Centreline 90º Angle head - Standard length - RAD160-DE. The RAD160-DE, designed primarily for use on 40 taper machines, with Drilling, Tapping and Milling capability. With 2 output spindles for added capability without the need for multiple heads. The RAD160-DE is available as standard with 2 x ER25 Collet chuck spindles (Cap. 16mm). Other output options are available on request.
Centreline 90º Angle head – Standard length – RAD225. The RAD225 is a Heavy duty unit designed primarily to suit 50 taper machines, with Drilling, Tapping and Milling capability and with fully automatic toolchange facility. The RAD225 is available as standard with an ER40 Collet chuck spindle (Cap. 30mm). Other output options are available on request.
Centreline 90º Angle head - Standard length - RAM225. The RAM225 is our standard heavy duty milling unit designed primarily to suit 50 taper machines, with milling capability and the flexibility of interchangeable tooling adaptors to facilitate the holding of drills, taps, end mills, shell mills etc. The tooling is held in position with a manual drawbar and accurately located on a standard ISO30 taper. Standard Toolholders can be used with either BT/CAT/DIN/QC 30 shanks.
Centreline 90º Angle head – Standard length – RAD225-DE. A Heavy duty unit designed primarily to suit 50 taper machines, with Drilling, Tapping and Milling capability. With 2 output spindles for added capability without the need for multiply heads. The RAD225 is available as standard with 2 x ER40 Collet chuck spindles (Cap. 30mm). Other output options are available on request.